micro controle

Products

Well level emptying control and cistern filling control relay – RFA 202 NFC

Since (without VAT): 33.00

Level Relay – Well level emptying control and cistern filling control relay

Shipping is only available for Continental Portugal Shipping and its respective Autonomous Regions: Azores and Madeira.

Product description

Level control in conductive liquids trough two level probes (minimum and mass), with protection for maximum level.
Level emptying control for artesian holes or wells and level filling control for tanks
Protection of pumps, against lack of water inside the tanks – alarm function for maximum level
Adjustable sensitivity, according to the liquid conductivity – selected in the front button – 4 – 30 KΩ


Applications

  • Level control in conductive liquids
  • Protection by maximum level, preventing spillage in deposits
  • Sensitivity adjustment – 4 – 30 KΩ
  • Bore or well emptying control, and tank filling
  • Protection of submersible electric pumps against lack of water

Operation

Power the relay (green led on – A.1)

The “S1” contact will arm when the liquid level reaches the maximum level probe (terminal 5) (green LED lights up – “NA” high level) – and when the liquid level drops below the terminal 9).

The “S1” contact disarms when the liquid level drops below the level of the probe of the minimum hole level (terminal 6) or above the maximum level of the tank (terminal 8) – turns off the green LED “NA” high level.

Note: The images shown may not correspond completely to the product described.

Additional information

Weight 210 g
Dimensions 11 × 8.5 × 4.9 cm
Sensitivity adjustable

4 a 30 KΩ

Room temperature

[-10ºC, +55ºC]

Output relay

AC 8A-250V / 50Hz – 1250VA DC 5A-24 V (C.R.)

Power

AC (24V, 230V, 400V) / 50Hz

Consumption

2VA (approx.)

Supply

24V AC, 230V AC, 400V AC

Fitting

11-pin base

micro controle